

Relining of main and lateral pipes with changes in diameter can be a challenge.
ProFlex is a 3D liner, which is very stable in the length direction and is especially well suited for relatively long sections and/or in pipes in poor condition.
The relined pipe will achieve a strength as a new pipe, even if there are many bends and/or dimension changes.
Advantages of lineTEC ProFlex:
The unique and very flexible polyester liner allows the relining to stretch in the length direction and also allows for dimension changes, so that the end result will be a wrinkle free rehabilitation which can also go through several 90 degree bends and will adapt to the actual conditions of the pipe.
Technical characteristics:
Fiber materiale is 100% polyester with an outer PUR coating. Liner is stitched and is undersized 10%.
Thickness (uncured) of 4,5 mm. Thickness after impregnation and curing of minimum 3,5 mm.
ProFlex is available in the following sizes: DN 70 - 100, DN 100 - 150, DN 150 - 200 and DN 200 - 250.
ProFlex is delivered in rolls of 100 mtr. (+/- 10 mtr.)
Curing with water (up to 70° celsius) or steam (with suitable calibration hose)