C.Scope Signal clamp for locator set
    • C.Scope Signal clamp for locator set

    C.Scope Signal clamp for locator set

    Tax excluded
    MSRP: kr.3,499.00

    The cable signal clamp must be used together with the SGA4 / MXT4 signal generator.

    The clamp is placed directly on or around a cable and will then send e.g. a 33 kHz signal through the cable, which can then be located by all C.Scope cable finders.

    The pliers work in the same way with fibreglass pipe rods that have at least 1 copper conductor. Compared with a probe, the advantage here is that you get a signal through the entire pipeline with the rod.


    The C.Scope Signal Clamp allows operators to apply the Signal Generator/ Transmitter signal effectively to any cable. It is an extremely practical way to allow individual cables to be traced even when the cable is in amongst other cables.

    Toroidal induction ring housed in robust plastic.
    Spring loaded jaws.

    Tuned for optimum use with 33kHz Signal Generators.

    Built to conform to BSEN61010-1:1993 and BSEN 61010-2-032:1995

    270 x 160 x 28mm

    Maximum service diameter = 105mm
    Suitable for use with all C.Scope Signal Generators and Transmitters.

    11 Items
    New product
    Comments (0)
    No customer reviews for the moment.