• New
lineTEC ProFlex +UV DN 100-125 x4,5 mm
search
  • lineTEC ProFlex +UV DN 100-125 x4,5 mm
  • lineTEC ProFlex +UV DN 100-125 x4,5 mm

lineTEC ProFlex +UV DN 100-125 x4,5 mm

122.00
VAT excluded
MSRP: 153.00

Better light transmission in the liner is due to the development of the HighTex UV fiber. Can be used in the wavelength range 250nm - 600nm.


The ProFlex +UV liner is particularly good for relatively long stretches and/or in pipes whose condition is estimated to be in poor condition. It is very stable in the longitudinal direction.


Can negotiate bends up to 90 degrees.

Quantity
Out-of-Stock

Advantages of lineTEC ProFlex +UV:

The unique and highly flexible polyester with HighTex UV and PU coating allows the lining to stretch longitudinally, so the end result is a wrinkle-free lining that can also go through bends of up to 90 degrees and will adapt to the actual conditions of the pipe.


Technical characteristics:

Fiber material is 100% polyester with HighTex UV and an outer PU coating. The liner is sewn and is undersized 10%. Thickness (uncured) of 4.5 mm. Material thickness after impregnation and curing of min. 3.8 mm. 

lineTEC ProFlex +UV is available in sizes DN 50-70, DN 70-80, DN 70-100, DN 80-100, DN 100-125, DN 100-150, DN 150-200, DN 200-250 and DN 250 -300.
Supplied in rolls of 100 mtrs. +/- 10 mtrs.

Curing with UV & LED light source. Can also be cured with water (up to 70° Celsius) or steam (with a suitable calibration hose) if ordinary epoxy is used.

120871032

Data sheet

Product classification
Needle felt liner +UV
Misc.
Wavelength 250nm - 600nm
New product

You might also like

Comments (0)
No customer reviews for the moment.