10x right light transmission in the liner is due to the development of the PES UVx 10 fiber. Can be used in the wavelength range 250nm - 600nm.
The ProFlex +UV liner is particularly good for relatively long stretches and/or in pipes whose condition is estimated to be in poor condition. It is very stable in the longitudinal direction.
Can negotiate bends up to 90 degrees.
Advantages of lineTEC ProFlex S UV:
The unique and highly flexible polyester with PES UVx 10 fiber and PU coating allows the lining to stretch longitudinally, so the end result is a wrinkle-free lining that can also go through bends of up to 90 degrees and will adapt to the actual conditions of the pipe.
The fiber material is 100% polyester with PES UVx 10 fiber and an outer PU coating. The liner is sewn and is undersized 10%. Thickness (uncured) of 4.5 mm. Material thickness after impregnation and curing of min. 3.8 mm.
lineTEC ProFlex S UV is available in sizes DN 100, DN 125, DN 150, DN 200 and DN 250. Can also be supplied in thickness 5.1 mm.
Supplied in rolls of 100 mtrs. +/- 10 mtrs.
Curing with UV & LED light source. Can also be hardened with water (up to 70° Celsius) or steam (with a suitable calibration hose) if alm. epoxy is used.
You might also like