lineTEC ProFlex +UV DN200-250 x4,5 mm
    • lineTEC ProFlex +UV DN200-250 x4,5 mm
    • lineTEC ProFlex +UV DN200-250 x4,5 mm
    • lineTEC ProFlex +UV DN200-250 x4,5 mm

    lineTEC ProFlex +UV DN200-250 x4,5 mm

    Tax excluded
    MSRP: kr.285.00

    Better light transmission in the liner is due to the development of the HighTex UV fiber. Can be used in the wavelength range 250nm - 600nm.

    The ProFlex +UV liner is particularly good for relatively long stretches and/or in pipes whose condition is estimated to be in poor condition. It is very stable in the longitudinal direction.

    Can negotiate bends up to 90 degrees.


    Advantages of lineTEC ProFlex +UV:

    The unique and highly flexible polyester with HighTex UV and PU coating allows the lining to stretch longitudinally, so the end result is a wrinkle-free lining that can also go through bends of up to 90 degrees and will adapt to the actual conditions of the pipe.

    Technical characteristics:

    Fibre material is 100% polyester with HighTex UV and an outer PU coating. The liner is sewn and is undersized 10%. Thickness (uncured) of 4.5 mm. Material thickness after coating and curing of min. 3.8 mm. 

    lineTEC ProFlex +UV is available in sizes DN 50-70, DN 70-80, DN 70-100, DN 80-100, DN 100-125, DN 100-150, DN 150-200, DN 200-250 and DN 250 -300.
    Supplied in rolls of 100 mtrs. +/- 10 mtrs.

    Curing with UV & LED light source. Can also be cured with water (up to 70° Celsius) or steam (with a suitable calibration hose) if ordinary epoxy is used.


    Data sheet

    Product classification
    Needle felt liners +UV
    Wavelength 250nm - 600nm
    New product

    You might also like

    Comments (0)
    No customer reviews for the moment.