- New

10x right light transmission in the liner is due to the development of the PES UVx 10 fiber. Can be used in the wavelength range 250nm - 600nm.
The ProFlex UV liner is particularly good for relatively long stretches and/or in pipes whose condition is estimated to be in poor condition. It is very stable in the longitudinal direction.
Can negotiate bends up to 90 degrees.
Advantages of lineTEC ProFlex S UV:
The unique and highly flexible polyester with PES UVx 10 fiber and PU coating allows the lining to stretch longitudinally, so the end result is a wrinkle-free lining that can also go through bends of up to 90 degrees and will adapt to the actual conditions of the pipe.
Technical characteristics:
The fiber material is 100% polyester with PES UVx 10 fiber and an outer PU coating. The liner is sewn and is undersized 10%. Thickness (uncured) of 4.5 mm. Material thickness after impregnation and curing of min. 3.8 mm.
lineTEC ProFlex S UV is available in sizes DN 100, DN 125, DN 150, DN 200 and DN 250. Can also be supplied in thickness 5.1 mm.
Supplied in rolls of 100 mtrs. +/- 10 mtrs.
Curing with UV & LED light source. Can also be hardened with water (up to 70° Celsius) or steam (with a suitable calibration hose) if alm. epoxy is used.
Data sheet
You might also like
10x right light transmission in the liner is due to the development of the PES UVx 10 fiber. Can be used in the wavelength range 250nm - 600nm.
The ProFlex UV liner is particularly good for relatively long stretches and/or in pipes whose condition is estimated to be in poor condition. It is very stable in the longitudinal direction.
Can negotiate bends up to 90 degrees.